Filter
Top Products
>
>
>
>
>
>.
>
>
>
>
>
Answer Supervision Time.
300 ms
Dial Tone.
Remote
Incoming Disconect Time.
300 ms
Incoming Line Dial Mode.
Rotary
Incoming Line Type.
Wink start
Inward Dial Plan Numbers.
Four digits. 4010
through 4097
Line Direction.
Two way
Outgoing Disconect Time.
300 ms
Outgoing Line Dial Mode.
Rotary
Outgoing Line Type.
Wink start
Signaling Type.
Type 1 Standard
•Touch-Tone signaling.
Touch-Tone signals are the
default.
•
Transfer Return Interval.
The Transfer Return
interval is set at four rings.
•Voice Terminal type.
BIS/HFAI (raised plastic
button) sets are the default.
Compare these default settings with the entries on the
System Configuration Form for Feature Modules 1 and 2
or Form le, System Form-Requirements and Options to
determine whether any setting must be changed.
ADMINISTERING IN
You can leave administration mode before you’ve finished
SEVERAL SESSIONS
setting all the operating conditions and optional features
for the system. Just complete the procedure you are
performing, then slide the T/P switch to the center
position. When you’re ready to continue, follow the steps
under “Enter Administration Mode” below, and resume
administration at the point where you stopped.
Before Administering a Svstem
3-17