Filter
Top Products
e Press [Enter]
g Press [Exit] to return to the Stations screen.
7
8
9
You hear a 2-beep signal to let you know that a copy
procedure is complete.
f Repeat steps b through e for each station for which
you want to copy line assignments.
To assignlines to another station, press
[Line/Pool]
and
repeat steps 4 through 6.
Label the stations with the telephone numbers you’ve
assigned.
Press
Conference to
return to the administration menu,
or leave administration mode by sliding the T/P switch
to the center position.
With a BIS-34D Console
1
2
3
4
5
6
7
Enter administration mode by sliding the T/P switch to
P.
Press
Conference
twice.
Lights flash next to Adm Tel, Adm Pool, Message, and Speaker.
Press
Adm Tel.
Press the Auto Intercom button or dial the code for the
station.
Green light goes on steady netx to
Adm Tel
and two beeps sound.
Press the line buttons until your selection is shown:
Green light on = line assigned to station
Green light off = line is not assigned to station
Press Adm Tel.
Continue administration or leave administration mode
by sliding the T/P switch to the center position.
3-38 Administering a New System