Filter
Top Products
With a Display Console
1
2
3
4
5
Enter administration mode by sliding the T/P switch to
P.
Press
Conference
twice.
The administration menu appears.
Press [More], [More], [Data], [Voe/Data]
Assign voice/data pairs by pressing the appropriate
Auto Intercom-buttons. Each successive press of a
button gives you one of the following codes:
Green light on=
voice terminal is in a voice/data pair
Green light off = voice terminal is not paired
Press
Conference
to return to the administration menu
or leave administration mode by sliding the T/P switch
to the center position.
With a BIS-34D Console
1
2
3
4
5
6
7
Enter administration mode by sliding the T/P switch to
P.
Press
Conference
twice.
Lights flash next to Adm Tel, Adm Pool, Message, and Speaker.
Press
Message.
Dial #211
Green light next to Message comes on steady and two beeps sound.
Press either one of two adjacent Auto Intercom
buttons:
Green light on =
station jack part of voice/data pair
Green light off = station jack is not paired
Press
Message.
Continue administration or leave administration mode
by sliding the T/P switch to the center position.
Administering a New System 3-49