Filter
Top Products
Press
[Enter].
Press the Auto Intercom button or dial the intercom
number of the station you are copying
to.
Press [Enter].
7
8
c
d
e
f
g
You hear a 2-beep signal to let you know that the copy
procedure is complete.
Repeat steps a through e for each station for which
you want to copy line assignments.
Press
[Exit]
to return to the Stations screen.
Press [DialAcc] and repeat steps 4 through 6 for each
station to which you want to copy line assignments.
Press Conference to return to the administration menu
or leave administration mode by sliding the T/P switch
to the center position.
With a BIS-34D Console
1
2
3
4
5
6
Enter administration mode by sliding the T/P switch to
P.
Press
Conference
twice.
Lights flash next to Adm Tel, Adm Pool, Message and Speaker.
Press Adm Tel.
Press the Auto Intercom button or dial the intercom
number for the station you want to assign dial access.
Steady green light goes on next to Adm Tel and two beeps sound.
Press the same Auto Intercom button or dial the same
intercom number from step 4.
Press the button of a line in each pool you want to
assign until your selection is shown.
Green light on =
station has dial access containing line
Green light off = station does not have dial access to pool
containing line
3-40 Administering a New System