Filter
Top Products
ASSIGNING
Each voice terminal in the system has a unique intercom
INTERCOM
number. These intercom numbers are automatically
NUMBERS
assigned to Auto Intercom buttons on the Display Console
and on a BIS-34 Console used with a system configured as
a small system. When a B1S-34 Console is used on a
system configured as a large system, lines are
automatically assigned to buttons above and to the right of
the dial pad. If there are fewer lines than there are buttons,
the remaining buttons can be programmed with features or
as Auto Intercom, The lights next to each Auto
Intercom button indicate the status of the voice terminal.
Auto Intercom buttons correspond to station jack
connections on modules in the control unit. Usually, one
station jack is used for each voice terminal, and the Auto
Intercom button represents the voice terminal connected to
that station jack. In some cases, however, two station
jacks may be used for-a single voice terminal. The second
jack is used to give the voice terminal access to the Voice
Announcement to Busy Voice Terminal feature or the
Simultaneous Voice and Data feature. The lower
numbered jack provides the intercom number.
DISPLAY CONSOLE
On the Display Console there are two types of shift
SHIFT BUTTONS
buttons (station shift and line shift) used during
administration.
Station Shift Buttons
The three station shift buttons allow you to administer up
to 120 stations using just the 40 Auto Intercom buttons
provided. When you press one of the station shift buttons,
you change the intercom numbers assigned to the Auto
Intercom buttons, as shown in Table 3-1:
3-6 The Administrator/Attendant Console