Filter
Top Products
3 Press
[System], [Type]
.
4 Press the appropriate button:
> For a square system, press
[Square]
.
> For a pooled system, press one of the following:
[ButnAcc], [ARS], [DialAcc]
.
> For a behind switch system, press
[More],
[BehindSw]
.
The message "System is Re-starting..." appears, followed by the
administration menu.
5
Press
Conference
to return to the administration menu
or leave administration mode by sliding the T/P switch
to the center position.
With a BIS-34D Console
1
2
3
4
5
6
.
Enter administration mode by sliding the T/P switch to
P.
Press Conference twice.
Lights flash next to Adm Tel, Adm Pool, Message, and Speaker.
Press Message.
The green light goes on steady next to Message. All flashing lights
go off.
Dial #202.
Two beeps Sound.
Dial the appropriate number
0
=
square
1
= pooled
with Button Access to line pools
2 = pooled
with Dial Acess to line pools.
3 = pooled
with Automatic Route Selection
4 = behind switch
Lights flash next to Adm Tel, Adm Pool, Message and Speaker.
Press
Conference
to return to the administration menu
or leave administration mode by sliding the T/P switch
to the center position.
Administering a Changed System 3-67