Filter
Top Products
3
Determine whether the new location has a jack field or
a direct connection to the control unit.
If you have a jack field, follow these steps:
a Locate the jumper cord with the voice terminal’s
intercom number.
b Unplug it from the jack in the jack field for the
voice terminal’s old location.
c Plug it into the jack in the jack field for the voice
terminal's new location.
Do not change any labels in the system. Simply record
the change of location in the system directory. The
voice terminal keeps its original intercom number and
does not require reprogramming.
If you have a direct connection from the new location
to the control unit, follow these steps:
.
a
b
c
d
e
f
Find the modular cord that terminates the wiring
run from the new location to the control unit.
At the control unit locate the jack number that
identifies the voice terminal’s intercom number.
NOTE:
Jack numbering differs from intercom
numbering. Jack locations run
sequentially, beginning with 01, and
intercom numbers run sequentially,
beginning with 10.
If another cord is in the jack, unplug it.
Plug the cord for the new location and intercom
number into the corresponding control unit jack
assigned to the voice terminal’s intercom number.
Apply a new label to the cord at the new location
and on the appropriate control unit module.
Record the change in the system directory.
You do not have to reprogram the voice terminal.
2-116 Modifying the System