Filter
Top Products
SELECTING THE
DIALING MODE
To select the dialing mode for tie lines, follow these steps:
1
P.
2
3
4
5
6
7
Press
[More], [More], [More], [TieLines], [More], [InMode].
The in mode screen appears.
Press the tie line button to select the dialing mode.
wanted.
Green light on = Touch-Tone selected the dialing mode.
Green light off = Rotary selected.
Press [OutMode]
The out mode screen appears.
Enter administration mode by sliding the T/P switch to
Press
Conference
twice.
The administration menu appears.
Perform steps 2 through 4 again, except select the
dialing mode for outgoing lines.
Press
Conference
to return to the main administration
menu, or leave administration mode by sliding the T/P
switch to the center position.
SELECTING THE DIAL
TONE
To select the dial tone for tie lines follow these steps:
1 Enter administration mode by sliding the T/P switch to
P .
2 Press Conference twice.
The administration menu appears.
3 Press
[More], [More], [More], [TieLines], [More], [DialTone].
The dial tone screen appears.
4 Touch the tie line button to select the dial
tone:
Green light on = (remote default)
Green light off = Local
5 Press
Conference
to return to main administration
menu or leave the administration mode by sliding the T/P
switch to the center position.
3-56 Administering a New System