Filter
Top Products
Testing lntercom-
Ring
2
3
4
5
6
1
2
3
4
Lift the handset.
The green light next to the red light goes on and you hear an
intercom dial tone.
Dial the intercom number of the voice terminal where
someone is waiting for the call.
You hear a single tone. At the other voice terminal, on tone
sounds, the red light glows steadily next to (Intercom-Voice), and
the green light next to the red light flashes.
Speak into your handset or speakerphone.
The other person now picks up the handset, and tells
you if the announcement was heard clearly.
At the other voice terminal the green light stops flashing and glows
steadily when the handset is lifted.
After verifying two-way communication, hang up the
handsets.
On each voice terminal, the lights go out, and the red light goes on
next to the third button down in the leftmost column of buttons.
.
At any voice terminal in the system, touch the fifth
button down in the leftmost column of buttons
(Intercom-Ring).
The red light next to the button goes on.
Lift the handset.
The green light next to the red light goes on and you hear an
intercom dial tone.
Dial the intercom number for the voice terminal where
the other person is waiting for the call.
You hear ringing. At the other voice terminal, three short rings
sound, the red light glows steadily next to the fifth button down in
the left most column of buttons (Intercom-Ring), and the green
light next to the red light flashes.
Wait until the other person answers and verify two-
way communication.
At the other voice terminal, the green light stops flashing and
glows steadily.
2-102 Testing the System