Filter
Top Products
Feature
module
Processor module
FIGURE 2-20 Installing the Feature Module.
Modifying the 517A7
The MERLIN II system can be configured to operate
Processor Module for
solely as a square (key) system. As such, every outside
Square (Key)
line appears on the same button at each voice terminal. If
Operation
you have Processor Module 517A7, use the following
steps to modify it for square (key) operation:
1 Open the Processor Module case by releasing the
seven snaps located around the edges of its case
(Figure 2-21).
2 Notice the two headers marked “AA” on the module’s
processor board. One header is located at the bottom
right of the module; the other header is located at the
center right.
Do not touch the header at the bottom.
Installing the Control Unit 2-75