Filter
Top Products
SELECTING THE
ANSWER
SUPERVISION TIME
To select the answer supervision time for tie lines, follow
these steps:
1
2
3
4
5
6
7
8
9
Enter administration mode by sliding the T/P switch to
P.
Press
Conference
twice.
The administration menu appears.
Press [More], [More], [More], [TieLines], [More], [More],
[AnsSupv]
The answer supervision screen appears.
Dial the line number or
press
the line button of a tie
line, then press
[Enter]
.
The current setting is displayed.
Press
[Drop]
remove the old setting.
NOTE: Press [Exit] if you do not want to change the
setting.
The answer supervison screen appears.
Dial the new setting.
>
time= 20 to 4800 ms (increments of 20)
> time= 300 ms (default)
NOTE:
Use the backspace button to erase numbers
incorrectly dialed.
Press
[Enter]
.
The system will round
down to the
nearest increment.
The answer supervion screen appears.
Repeat steps 4 through 7 for each tie
line port.
Press
Conference
to return to the main administration
menu, or leave administration mode by sliding the T/P
switch to the center position.
Administering a New System 3-57