Filter
Top Products
7 Press Adm Tel
8 Press Conference to return to the administration menu
or leave administration mode by sliding the T/P switch
to the center position.
IDENTIFYING
Initially, the system recognizes all analog voice terminals
ANALOG VOICE
as BIS
or HFAI models, the kind that have raised plastic
TERMINAL TYPE
buttons.
●
Analog voice terminals that have flat membrane
buttons are the 5-button, 10-button, 34-button, and 34-
button deluxe models.
• Analog voice terminals that have raised plastic buttons
are the 10-button HFAI voice terminal, the 34-button
(SP-34) voice terminaI with speakerphone, the 34-
button (SP-34D) voice terminal with speakerphone and
display, and the BIS-10 BIS-22, BIS-34 voice
terminals, and BIS-22D and BIS-34D voice terminals
with display.
If the system you’re administering has any voice terminals
with flat membrane buttons, you must identify them by
intercom number. Refer to the following Station
Configuration Forms to determine which voice terminals
in the system have flat membrane buttons.
For Release 3:
• Form 3b, Station Configuration Form, Analog Stations
and Basic Telephones (Square Systems)
●
Form 3f, Station Configuration Form, Analog Stations
and Basic Telephones (Pooled Systems)
For Feature Module 2:
• Station Configuration Form, Analog Stations and Basic
Telephones (Square Systems)
• Station Configuration Form, Analog Stations and Basic
Telephones (Pooled Systems)
Administering a New System
3-41