Filter
Top Products
TO ENTER
ADMINISTRATION
MODE
TO LEAVE
ADMINISTRATION
MODE
SUMMARY OF
ADMINISTRATION
PROCESS
Follow these steps to enter the administration mode:
1
2
Slide the T/P switch on the left side of the console to
P.
Press
Conference
twice.
On the DisplayConsole, the administration menu appears. On the
BIS-34D Console, lights start flashing next to Adm Pool, Adm
Tel, Message, and Speaker.
To
center position.
leave administration mode, slide the T/P switch to the
Following is a Iist of the procedures that make up the
administration process. The procedures are listed in the
order in which they are performed.
●
Set system operating conditions
> Set system size
> Set system type
> Designate attendant positions
●
Perform flexible numbering (FM2 and R3 only)
● Administer lines
>
Assign lines to pools
> Specify toll type
> Specify Touch-Tone or rotary signaling on lines
● Administer stations
>
Assign lines and line pools to stations
> ldentify analog voice terminal type
>
Identify jacks for voice announcement to busy
voice terminal feature
3-18 Before Administering a System