Filter
Top Products
With
a
Display Console
1
2
3
4
5
6
Enter administration mode by sliding the T/P switch to
P.
Press
Conference
twice.
The administration menu appears.
Press
[Stations], [Line/Pool].
Press the Auto Intercom button or dial the code for the
station
Press
[Enter] .
Press the the buttons until your selection
behind-switch systems, lines are assigned
in which you press the line buttons.
Green light on =
line is assigned to the station
Green light off= line is not assigned to the station
Red light on =
line is assigned to a pool
is shown. For
in the order
If you want to give another station the same line
assignments as one you have already set up, use the
following shortcut:
CAUTION:
Be aware that when you copy line
assignments, you also copy call restrictions,
allowed list, and disallowed list permissions. Be
sure you want the two stations to be identical in
these respects before using this copy procedure.
a
b
c
d
Press
[Copy] .
In response to the prompt, press the Auto Intercom
button or dial the code of the station you are
copying
from.
In response to the prompt, press the Auto Intercom
button or dial the code of the station you are
copying to.
Press [Enter] .
Administering a New System
3-37