Filter
Top Products
DEFAULT TIE LINE
SETTINGS
SELECTING THE
DIRECTION
The default settings for tie line options are summarized
below in Table 3-3.
TABLE 3-3 Default Tie Line Settings
Tie Line Option
Default Setting
Answer supervision time
300 ms
Dial mode (incoming line)
Rotary
Dial mode (outgoing line)
Rotary
Dial Tone
Remote
Direction
Two way
Disconect Time (incoming)
300 ms
Disconect Time (outgoing)
300 ms
Inward Dial Plan
Four digits, 4010 through 4097
Line type (incoming)
Wink start
Line type (outgoing)
Wink start
Signal type
Type 1 Standard
To select the direction on which tie line calls can be
initiated, follow these steps:
1 Enter administration mode by sliding the T/P switch to
P.
2
Press
Conference
twice.
The administration menu appears.
3
Press
[More], [More], [More], [TieLines], [Dirctn].
The direction screen appears.
4 Dial the line number or press the line button of a tie
line, then press
[Enter].
Administering a New System
3-53