Filter
Top Products
●
“Installing a Tie Line Module” on page 2-80,
●
“Installing a Basic Telephone Module” on page 2-81.
1. Lower module
onto rod on
carrier
2 Swing in
FIGURE 2-15 Installing a module on the carrier.
REMOVING A
MODULE
To remove a module, refer to Figure 2-16 and follow these
steps:
1 Press up on the release tab on the bottom of the
module.
2 Pull the module away from the carrier.
3 Disengage the module from the rod on the carrier.
2-64 Installing the Control Unit