Filter
Top Products
With a BIS-34D Console
1
2
3
4
5
6
7
Enter administration mode by sliding the T/P switch
to
P.
Press
Conference
twice.
Lights flash next to Adm Tel, Adm Pool, Message, and Speaker.
Press
Message.
Green light goes on steady and two beeps sound.
Dial #302
Press line buttons for the selection you want:
Green light on =
Touch Tone selected
Green light off = rotary seiected
Press
Message.
Continue administration or leave administration
mode
by sliding the T/P switch to the center position.
Administering Stations
ASSIGNING LINES TO
After you have administered lines or line pools, you must
STATIONS
assign them to stations. If you are assigning dial access to
line pools, see “Assigning Lines to Stations for Dial
Access to Pools” below. Refer
to
Form la, System
Form-Incoming Lines for Release 3, or the System
Configuration Form for Feature Module 2 for proper
assignments.
Assigning Lines/Line
The following procedure can be used for assigning lines or
Pools to Stations for
line pools for a square, button access, or behind-switch
Square, Button-
system.
Access, and Behind
Switch Systems
3-36 Administering a New System