Filter
Top Products
TABLE 3-1 Display Console Station Shift Buttons
Label
Selects Intercom Numbers
Shift 1
10 through 49 (or the equivalent Flexible Numbering codes)
Shift 2
50 through 69,700 through 719 (or the equivalent
Flexible Numbering codes)
Shift 3
720 through 759 (or the equivalent Flexible Numbering codes)
If you want to select a particular voice terminal, the light
must be on next to the shift button for the group that
contains that voice terminal’s intercom number. If the
light isn’t on, press the appropriate shift button before
pressing the Auto Intercom button. For example, if you
want to assign lines to the voice terminal represented by
intercom nurnbe~61, press Station Shift 2. The light next
and 700 through 719.
to Station Shift 2 comes on, and the Auto Intercom
buttons now represent intercom numbers 50 through 69
Line Shift Buttons
There are two line shift buttons on the Display Console for
use during administration of systems with more than 30
lines. If you press Line Shift 1, the line buttons represent
the first 30 lines (the lines connected to line jacks 01
through 30). If you press Line Shift 2, the line buttons
represent the remaining lines (those connected to line
jacks 31 through 56).
USING THE DISPLAY
Both administrator/attendant consoles have display
DURING
screens; however, they are used differently during
ADMINISTRATION
administration.
The Administrator/Attendant Console 3-7