Filter
Top Products
Administering Data
IDENTIFYING
ANALOG JACKS
NEEDING
SIMULTANEOUS
VOICE AND DATA
FEATURE
Considerations
Refer to Form 1d, System Form-Station Planning for
Release
3,
or the Station Jacks section of the Master
planning Form for Feature Module 2. The form shows
whether a second station jack has been assigned to any
analog voice terminal to allow simultaneous voice and
data calling.
• To use this feature, you must have a General Purpose
Adapter and a modem connected to your analog voice
terminal, not a basic telephone.
• You can assign either the Voice Announcement To
Busy Telephone feature or the Simultaneous Voice
and Data feature to a voice terminal. Since both
features require two consecutive analog jacks, a voice
terminal
cannot
have both features.
.
• You should assign the voice/data station pair to an
analog station jack with an odd jack number (even
intercom number) and the next higher analog phone
jack that has an even jack number (odd intercom
number). The intercom number of the voice terminal
connected to these jacks is the even intercom number.
• You cannot use a Hands-Free Unit when the
Simultaneous Voice and Data feature has been
administered.
• The Voice Announcement to Busy Telephone feature
decreases the total number of telephones a system can
have.
Follow the appropriate procedure below to identify any
station jacks invoice/data pairs.
3-48 Administering a New System