Filter
Top Products
TABLE 3-5 Display Console Administration (continued)
Procedure: Slide T/P switch to P, press Conference button
Feature twice, then follow steps for feature
Hold Disconnect
1 Press [Lines], [More], [HidAband] .
lnterval
2 Press line buttons:
Steady green on =
line drops held call on long (450 millisecond)
signal (default)
Green off = line drops held call on short (50 millisecond) signal
3 Press Conference to return to the administration menu.
Intercom Dial Tone
1 Press [More], [Opitions], [More], [More], [More], [ICMdial] .
2 Press either
[Internl]
to provide the MERLIN II system intercom
dial tone, or
[Externl]
to provide CO line dial tone.
3 Press Conference to return to the administration menu.
Labels for Lines
1 Press [More], [More], [Label], [Lines] .
2 Enter the line number or press the line button.
3 Press [Enter] .
4 Use
Backspace
or
Drop
to remove the current entry.
5 Enter the label (up to 7 characters).
6 Press [Next] to enter a label for the next line in sequence or
press
[Enter] .
7 Press
Conference
to return to administration menu.
Labels for Stations
1 Press [More], [More], [Label] .
2 Press
[Stations] .
3 Enter the station number or the Auto Intercom button.
4 Press
[Enter] .
5 Use
Backspace
or
Drop
to remove the current entry.
6 Enter the label for the station (up to seven characters).
7 Press
[Next]
to enter a label for the next station in sequenence or
press [Enter] .
8 Press
Conference
to return to the administration menu
Optional Features 3-85