Filter
Top Products
Follow the appropriate procedure below to identify any
voice terminals in the system that are membrane-button
rather than BIS/HFAI (raised button) models.
With a Display Console
1
Enter administration mode by sliding the T/P switch to
2
P.
Press Conference twice.
The administration menu appears.
Press
[Stations], [More], [BIS/HFAI]
3
4
Press the Auto intercom button until your selection is
shown:
5
Green light on = BIS/HFAI voice terminal (raised buttons)
Green light off= flat membrane-button voice terminal
Press
Conference
to return to the administration menu
or leave administration mode by sliding the T/P switch
to the center position.
With a BIS-34D Console
1
2
3
4
5
Enter
P.
Press
administration mode by sliding the T/P switch to
Conference twice.
Lights flash next to
Adm Tel, Adm Pool, Message
and
Speaker.
Press
Message.
Light goes steady next to
Message.
All flashing lights go off.
Dial #320.
Two beeps sound.
Press Auto Intercom button until your selection is
shown:
Green light on = BIS/HFAI voice terminal (raised buttons)
Green light off= flat membrane button voice terminal
3-42 Administering a New System