Filter
Top Products
Connecting a Printer
When the printer is located greater than 50 feet away from
to the Control Unit 50
the control unit, or the printer and the MERLIN II system
or More Feet Away
are not connected to the same ground, connect the printer
according to these instructions. The following items are
required for installation:
EMI Filter (Z200A)
Adapter (355AF) for male connector on interface cable
●
●
●
●
●
●
●
●
●
●
●
●
or
Adapter (355A) for female connector on interface
cable
Two 400B2 Power adapters (21691)
Z3A1 ADU
Z3A1 or Z3A4 ADU
EIA crossover cable (M7U-87)
ADU crossover cable (D8AM-87)
AC transformer (2012D)
Adapter (2488)
Adapter (858A)
Power cord (D6AP-87)
Before connecting a printer to the control unit, make sure
that all modules are installed on the control unit. Refer to
Figure 2-24 and the following instructions to connect a
printer to the control unit:
2-86 Installing the Control Unit