Filter
Top Products
TABLE 3-5 Display Console Administration (continued)
Procedure: Slide T/P switch to P, press Conference button
Feature
twice, then follow steps for feature
Camp On
To set the Camp
1 Press [More], [Opitions], [CampOn] .
On return
2 Use Backspace or Drop to remove the current entry.
interval
3 Enter the number of minutes (1 through 5) that calls should remain
camped.
4 Press [Enter] .
5 Press Conference to return to the administration on menu.
Centralized
1 Press [More],
[More], [Cnrt-Prg] .
Programming
2 Press Auto Intercom button or dial the code for the station to be
programmed.
3 Press [Enter]
.
4 Program the voice terminal as appropriate.
5 Press Conference to return to the administration menu.
Dialing Timeout
1 Press [More],
[Opitions], [More], [More], [Rotary] .
Interval for Rotary
Lines
2 Use Backspace or Drop to remove the current entry.
3 Dial number to specify timeout interval:
0 = 0 seconds
1 =
4 seconds
2 = 8 seconds
3 = 12 seconds
4 Press Conference to return to the administration menu.
Direct Inward
1 Press [Lines],
[DISA] .
System Access
2 If desired, dial a four digit password or press Drop to remove entry.
3 Press [Enter] .
4 Press [NoRestr] for no restriction or press [InwdOnly] for
inward only.
(continued)
Optional Features 3-81