Filter
Top Products
Installing the Top
Cover
To install the top cover, see Figure 2-28 and follow these
steps:
1
2
3
4
5
Be sure the cords have been pressed through the wire
managers at the base of the modules.
Install the empty module that came with the system in
the rightmost slot of the carrier if it is lacking a
functional module in this slot. This empty module
helps to support the top cover.
Hold the top cover so that the hooks are facing you.
Engage the tabs at the rear of the top cover with the
carrier.
Lower the top cover so that the legs lock into the vents
on the modules.
2-108 Testing the System