Filter
Top Products
TABLE 3-6 BIS-34D Console Administration (continued)
Feature
Centralized Programming
Dialing Timeout Interval for
Rotary Lines
Direct Inward System Access
To assign lines for DISA
To specify a password for
DISA users
Procedure: Slide T/P switch to P, press Conference
button twice, then follow steps for feature
1
Press Conference.
2
Press Auto Intercom button for phone to be programmed.
3
If red light next to
Adm Tel
goes off and console rings way
5 seconds, go on to step 4. If not, wait for
light to go off or
try again later.
4
Program the voice terminal.
5 Press Conference twice.
1 Press Message.
2 Dial #317.
3
Dial number to specify timeout interval
0 =
0 seconds
1 = 4 seconds
2=
8 seconds
3
= 12 seconds
4 Press Message.
1 Press Message.
2 Dial #323.
3 Press line button:
Steady green light on = line used for DISA
Green light off = line not used for DISA
4 Press Message.
1 Press Message.
2 Dial #324.
3
Dial a 4-digit password or touch
Drop
to remove entry.
4 Press Message.
3-100 Optional Features