Filter
Top Products
TABLE 3-6 BIS-34D Console Administration (continued)
Procedure: Slide T/P switch to P, press Conference
Feature
button twice, then follow steps for feature
Direct Inward System Access
T
O
set up DISA outward
1 Press Message.
restriction
2 Dial #325.
3 Dial 0 for outward restriction or 1 for no restriction
4 Press Message.
To get a printout of DISA
1 Press Message.
options
2 Dial #905 and wait for beep.
3 Press Message.
Disconnect lnterval for Held
1 Press Message.
Calls
2 Dial #303.
3
Press line buttons:
Steady green light on=
line drops held call on long (450
millisecond) signal (default)
Green light off = line drops held call on short (50
millisecond) signal
4 Press Message.
Extended Station Status
1
Press
Message.
mode
2 Dial #329.
3 Dial 0 for Hotel/Motel or 1 for CMS mode.
4 Press Message.
To put consoles in and out
1 Press Message.
of ES Status Display
2 Dial #330.
mode
3 Press Auto Intercom button(s):
Steady green light on = console in display mode
Green light flashing = console not in display mode
4 Press Message.
To specify the ES status
Optional Features 3-101