Filter
Top Products
> To program a switchhook flash at the beginning of
a programmed dialing sequence, press Recall and
then press Hold.
> To program Touch-Tone Enable, press Transfer.
6
Leave programming mode by sliding the T/P switch to
the center position.
NOTE:
Digital phones: Dial #00.
Last Number Redial
A Last Number Redial button
allows the user to redial with one much the number dialed
last. The user does not need to do anything to save the
number. To program a Last Number Redial button, follow
these steps:
1
2
3
4
5
Label a button.
Enter programming mode by sliding the T/P switch to
P.
NOTE:
Digital phones: Dial #33.
Press the button you want to program.
Dial
✱
73 (you do not need to dial an Outside number).
Leave programming mode by sliding the T/P switch to
the center position.
NOTE:
Digital phones: Dial #00.
Saved Number Redial
With a Saved Number Redial
button, a user can save the number just dialed to be dialed
later with one touch. The user saves the number by
pressing a button before he or she hangs up. Later, they
press the Saved Number button again, and the phone
automatically redials the last number saved. To program a
Saved Number Redial button, follow these steps:
Programming Voice Terminals
3-119