Filter
Top Products
5
6
7
Press the appropriate Auto Intercom buttons until the
green lights show the code you wan
Steady green light = attendant position
Flashing green light = potential attendant position used as
nonattendant voice terminal
Green light off = cannot be assigned as attendant position
Press [Store] .
The message “System is Re-starting...” appears. When the process
is complete after a short delay, the administration menu appears.
Press
Conference
to return to the administration menu
or leave administration mode by sliding the T/P switch
to the center position.
With a B1S-34D Console
1
2
3
4
5
6
7
Enter administration mode by sliding the T/P switch to
P.
Press
Conference
twice.
Lights flash next to Adm Tel, Adm Pool, Message, and Speaker.
Press
Message.
Light goes on steady next to Message. Flashing lights go off.
Dial
#203.
TwO beeps sound.
Press the Auto Intercom button for the appropriate
selection:
Steady green light = attendant position
Flashing green light = potential attendant position
Green light off = cannot be assigned as an attendant position
Press #.
After a short delay, lights flash to Adm Tel, Adm Pool,
Message, and Speaker.
Continue administration or leave administration mode
by sliding the T/P switch to the center position.
Administering a Changed System
3-69