Filter
Top Products
Chapter 6 Network Deployment
X6004 User’s Guide
89
6.5 NTP (Network Time Protocol) Configuration
Use this screen to configure time settings on the X6004. To access this screen, click
Configuration > Network > NTP.
Figure 78 Configuration > Network > NTP
Each field is described in the following table.
Table 15 Configuration > Network > NTP
LABEL DESCRIPTION
Current Time and
Date
This section displays the current date and time.
Time and Date
Setup
Manual Select this if you want to specify the current date and time in the fields below.
New Time Enter the new time in this field, and click Apply.
New Date Enter the new date in this field, and click Apply.
Get from Time
Server
Select this if you want to use a time server to update the current date and time in
the X6004.
Time Server
Address 1/2
Enter the IP address or URL of your time server. Check with your ISP or network
administrator if you are unsure of this information.
Time Zone Setup
Time Zone Select the time zone at your location.
Enable Daylight
saving
Select this if your location uses daylight savings time. Daylight savings is a period
from late spring to early fall when many places set their clocks ahead of normal
local time by one hour to give more daytime light in the evening.
Start Date Enter which hour on which day of which week of which month daylight-savings
time starts.