Filter
Top Products
Chapter 14 Authority Group
X6004 User’s Guide
134
14.3.3 Configure SIP Extensions
After you create SIP extensions you can click on the Edit button in the Authority Group
configuration screen to configure further settings. The Basic screen for a SIP extension
appears as shown.
Figure 109 SIP Extension: Basic
Each field is described in the following table.
Apply Click Apply to save your changes.
Cancel Click Cancel to go back to the previous screen without saving your changes.
Table 41 Add a SIP Extension
LABEL DESCRIPTION
Table 42 SIP Extension: Basic
LABEL DESCRIPTION
Basic Setting
Group Select the authority group you want this extension to belong to.
Extension
Number
This field displays the extension number of this SIP extension.
Web/IVR/VM PIN
Code
Type the PIN code that this allows the person with this extension to access the
web portal, Interactive Voice Response (IVR) system or Voice Mail. This value can
be up to eight alphanumeric characters and spaces are not allowed.
SIP Auth. User
Name
Type the SIP user name associated with this extension. The IP phone registering
with the X6004 must provide this for authentication. The user name can be up to
32 alphanumeric characters long. Spaces are not allowed.
SIP Auth.
Password
Type the SIP password associated with this extension. The IP phone registering
with the X6004 must provide this for authentication. The password can be up to 32
alphanumeric characters long. Spaces are not allowed.
Department Type the department for this SIP extension. This field can be left blank.
First Name
Type the first name of the person this SIP extension is assigned to. This field can
be left blank.