Filter
Top Products
Chapter 9 QoS
X6004 User’s Guide
109
Figure 92 Configuration > PBX > Server Configuration > QoS
Each field is described in the following table.
Table 26 Configuration > PBX > Server Configuration > QoS
LABEL DESCRIPTION
QoS
Select the QoS method you want to use to mark outgoing frames on the X6004.
You can choose:
• TOS and then select one of the four classes of service supported on the
X6004: minimize delay, maximize throughput, maximize reliability or
minimize cost.
• DS (DiffServ) and then select the DSCP value to mark the outgoing packets.
You can choose: one of the AF (Assured Forwarding), EF (Expedited
Forwarding) or one of the CS (Class Selector) values.
• User Define and then enter a value to assign to the ToS field in decimal
notation. You can set the value to a value from 0 to 255. The X6004 displays
the value you enter in hexadecimal notation.
• None, if you do not want to mark the ToS field of the outgoing VoIP packets.
Apply
Click this to save your changes.
Reset Click this to set every field in this screen to its last-saved value.