Filter
Top Products
Chapter 3 Tutorials
X6004 User’s Guide
53
Figure 33 local_call LCR
3 The Dial Condition screen appears as shown.
•Type 0 followed by a period (.) in the Dial Condition field. This means that this LCR
will be used when callers dial any number that begins with a 0. The period (.) is a
wildcard character, meaning anything can follow the zero.
• Test the dial condition. In our example, we tested the number 05555555 to see if it
matches our dial condition. You can test any number by typing it in the Number
Pattern Test field and clicking the Right icon; an O appears, if the number typed in
matches the dial condition and an X appears if it does not match the dial condition.
• Specify an offset value. In our example, we configure an offset value of 1. The offset
value tells the X6004 how many initial digits (if any) it should strip off of the dialed
number before routing the call to the external line. See Figure 37 on page 55 for an
example.
• Click Apply to save your settings.
Figure 34 Dial Condition for local_call LCR
4 You are done configuring the LCR. However, before it can be used by any of the phones
connected to the X6004, the LCR needs to be assigned to an appropriate authority group.