Filter
Top Products
Chapter 18 Outbound Line Group
X6004 User’s Guide
167
18.4.1 Add/Edit SIP Trunk
The screens for editing or adding SIP trunks on the X6004 contain the same fields. Only the
screen used to add SIP trunks is shown below. Click the Add (or Edit) icon in the SIP Trunk
section of the Outbound Line Group configuration screen to view the screen as shown.
Figure 146 Add/Edit SIP Trunk
Each field is described in the following table.
18.4.2 Configure a SIP Trunk
Use this screen to configure a SIP trunk. Click the Advanced icon in the SIP Trunk section of
the Outbound Line Group configuration screen to view the screen as shown.
Table 66 Add/Edit SIP Trunk
LABEL DESCRIPTION
Machine ID
Select the ID of the X6004 on which you want to configure the SIP trunk. This is an
internal name (not configurable) of the X6004. Only one choice is shown if you
have not configured ZyStack.
This field is not available when editing a SIP trunk configuration.
Group Name
Type the name of this SIP trunk. You can use alpha-numeric characters and
spaces are not allowed.
Description
Type the description for this SIP interface. You can use alpha-numeric characters
and spaces are allowed.
Apply
Click this to save your changes.
Back to Outbound
Group/Cancel
Click this to go to the Outbound Line Group screen without saving your changes.