Chapter 29 Diagnostics
X6004 User’s Guide
250
Figure 216 Maintenance > Administration > Diagnostic > Information Collect
Each field is described in the following table.
29.1.2 Packet Capture Screen
Use this screen to log network traffic going through the X6004 LAN or WAN interface. Click
Maintenance > Administration > Diagnostic > Packet Capture to view the screen as
shown.
Table 118 Maintenance > Administration > Diagnostic > Information Collect
LABEL DESCRIPTION
Machine ID
If you have more than one X6004 configured in a ZyStack, select the one from
which you want to collect information.
Collect Now
Click Collect Now to capture the configuration details of the X6004.
Note: It takes about 1 minute to perform the data collection. Do not
try to browse to other screens while the capture is in
progress.
Filename This field displays the name of the compressed file which holds the running
configuration details. The file naming convention is: diaginfo-YYYYMMDD.tar.gz,
where YYYY is the year, MM is the month and DD is the day of the month on
which the capture took place. The file can be uncompressed with variety of data
compression utilities for example WinRAR or WinZIP.
Last Modified
This field displays the date and time when the information was retrieved from the
X6004.
Size
This field displays the size of the file.
Download
Click Download to save the file to your computer.