Filter
Top Products
Chapter 25 Status Observation
X6004 User’s Guide
225
Figure 199 Monitor > Status Observation > FXS Peer
Each field is described in the following table.
25.3 FXO Trunk Status
Use the FXO Trunk screen to view status information about external connections via FXO
interface cards. Click Monitor > Status Observation > FXO Trunk in the web configurator
to view the screen as shown.
Table 100 Monitor > Status Observation > FXS Peer
LABEL DESCRIPTION
Query
Use this section to specify your query criteria. You can select an attribute, value
pair for your search. You can choose to query by:
•Machine ID - choose the X6004 (if you have a ZyStack configured) for which
you want to view status details of FXS extensions.
• Call Status - select whether you want to view status details about extensions
that are currently busy or idle.
Click Query to update the status detail table in the FXS Peer section of the
screen.
Refresh interval
Enter how often (seconds) you want the X6004 to update this screen. Click Apply
to update the screen immediately.
If you do not want this screen to update periodically, enter 0.
FXS Peer
This section displays the status detail table.
Machine ID
This field displays the auto-configured name of the X6004.
Slot This field displays the slot (A - D) where the FXS interface card is installed.
Port This field displays the port number on the FXS interface card.
Number This field displays the extension number associated with an FXS port or it displays
N/A, if no FXS extension has been configured for an FXS port.
Call Status
This field displays busy if an FXS extension is currently engaged, otherwise it
displays idle.