Filter
Top Products
Chapter 18 Outbound Line Group
X6004 User’s Guide
168
Figure 147 Configure a SIP Trunk
Each field is described in the following table.
Table 67 Configure a SIP Trunk
LABEL DESCRIPTION
SIP Setting
Number Enter the SIP number associated with the SIP account for this SIP trunk. In the full
SIP URI, this is the part before the @ symbol. You can use up to 127 printable
ASCII characters.
SIP Local Port Enter the X6004’s listening port number, if your VoIP service provider gave you
one. Otherwise, keep the default value.
SIP Server
Address
Enter the IP address or domain name of the SIP server provided by your VoIP
service provider. You can use up to 95 printable ASCII characters. It does not
matter whether the SIP server is a proxy, redirect or register server.
SIP Server Port Enter the SIP server’s listening port number, if your VoIP service provider gave
you one. Otherwise, keep the default value.
REGISTER
Server Address
Enter the IP address or domain name of the SIP register server, if your VoIP
service provider gave you one. Otherwise, enter the same address you entered in
the SIP Server Address field. You can use up to 95 printable ASCII characters.
REGISTER
Server Port
Enter the SIP register server’s listening port number, if your VoIP service provider
gave you one. Otherwise, enter the same port number you entered in the SIP
Server Port field.
SIP Service
Domain
Enter the SIP service domain name. In the full SIP URI, this is the part after the @
symbol. You can use up to 127 printable ASCII Extended set characters.