Filter
Top Products
Chapter 3 Tutorials
X6004 User’s Guide
42
" This chapter assumes that you have already configured your network settings.
See the Network Wizard section in the QSG or Chapter 6 on page 85 for more
information.
3.1 Making Internal Calls
This tutorial sets up the internal telephone extensions on your network. At the end of this
tutorial you should be able to call between extensions. The next figure shows the telephone
extensions (1001 - 1010) configured in this tutorial. All of the extensions are members of an
authority group called Basic (you need to create an authority group before configuring
extensions, see Chapter 2 on page 37 for more information). The figure also shows an internal
call between extensions 1001 and 1009.
Figure 10 Internal Calls
3.1.1 Configure SIP Extensions
The following section introduces how to create the authority group called Basic and ten SIP
extensions 1001 to 1010 on the X6004. The number of extensions you can create is limited by
your service subscription (see Section 31.1.1 on page 259).
Procedure:
1 In the web configurator, click Configuration > PBX > Extension Management >
Authority Group to open the following screen.
Figure 11 Configuration > PBX > Extension Management > Authority Group
1001
1002
1003
1004 1005
1006
1007
1008
1009 1010
Basic