Filter
Top Products
Chapter 3 Tutorials
X6004 User’s Guide
52
3.2.2 Dialing Rule for PSTN
The following sections show you how to create outbound dialing rules (also referred to as
Least Cost Routing or LCR).
The LCRs determine which outside line the X6004 should use to complete outbound calls. In
our example we want to use the PSTN1 outbound line group to complete local calls.
Figure 31 Outbound Calls via PSTN
Procedure:
1 In the web configurator, click Configuration > PBX > Outbound Line Management >
LCR to open the following screen.
Figure 32 Configuration > PBX > Outbound Line Management > LCR
2 Click the Edit icon in the local_call section to open the following screen. Select the
outbound line group from the pool column that you want to add to this LCR (in our
example this is IPPBX_001:PSTN1 as configured in Section 3.2.1 on page 49), then
click the Right icon to move them to the Selected column. Click Apply to save the
outbound line group in the LCR and then click the Add icon to configure a dial
condition.
FXO
PSTN
1001
local_call