Chapter 23 ZyStack
X6004 User’s Guide
210
The following table describes the labels in this screen.
23.2.2 ZyStack Edit Screen
Use this screen to edit the serial number or description of an existing ZyStack member. Click
the Edit icon in the Configuration > ZyStack > Setting screen to view the screen as shown.
Figure 191 ZyStack Edit
The following table describes the labels in this screen.
Table 93 ZyStack Add
LABEL DESCRIPTION
ZyStack Add Use this section to add an additional member to your ZyStack.
Serial Type the serial number of the X6004 you want to add to the ZyStack. You can get
the serial number by clicking on the edit icon in the Configuration > ZyStack >
Setting screen of an X6004 that is not part of a ZyStack.
Description Type a description for this ZyStack member.
WAN IP Type the WAN IP address of the X6004 you want to add to the ZyStack.
LAN IP Type the LAN IP address of the X6004 you want to add to the ZyStack.
Z_Interface This field is only configurable for the ZyStack master. It displays whether the
interface on the master X6004 is LAN or WAN for the ZyStack.
Failsafe Select the failsafe mode for this ZyStack. Select Active if you want all the X6004 to
be in operational mode in the ZyStack or Select Standby if you want the X6004 to
act as a back up in case of a failure of a ZyStack member. See Section 23.1 on page
207 for more information.
Add Click Add to save your changes to the X6004.
Cancel Click Cancel to go back to the previous screen without saving your changes.
Table 94 ZyStack Edit
LABEL DESCRIPTION
Machine ID This field displays the system name of the X6004. The system name is automatically
assigned to the X6004 based on when it was added to the ZyStack. IPPBX_01 is
always the master (or a stand-alone IPPBX) followed by slaves IPPBX_02,
IPPBX_03 and so on.
Serial Type the serial number of the X6004 you want to add to the ZyStack. You can get
the serial number by clicking on the edit icon in the Configuration > ZyStack >
Setting screen of an X6004 that is not part of a ZyStack.
Description Type a description for this ZyStack member.