ZyXEL Communications X6004 Telephone User Manual


 
Chapter 26 System Log
X6004 User’s Guide
231
26.2.1 Filter Log Results
Use this screen to filter the logs you want to view. Click the Show Filter button in the View
Log screen to bring up the log filter.
Figure 203 Report > LOGS > System Log > View Log: Show Filter
Each field is described in the following table.
Left / Right Click the Left button to view the previous log page or click the Right button to view
the next log page.
# This field displays a sequential number of the log.
Time This field displays the time the log was recorded. See Section 6.5 on page 89 to
configure the X6004’s time and date.
Message This field states the reason for the log.
Source This field lists the source IP address of the incoming packet.
Destination This field lists the destination IP address of the incoming packet. This is typically
the LAN or WAN IP address of the X6004.
Note This field displays additional information about the log entry.
Table 104 Report > LOGS > System Log > View Log (continued)
LABEL DESCRIPTION
Table 105 Report > LOGS > System Log > View Log: Show Filter
LABEL DESCRIPTION
Display Select a category of logs to view; select All Logs to view logs from all of the log
categories that you selected in the Log Setting page. Refer to Section 26.1 on
page 229 for more information on log categories.
Keyword
You can filter the logs to only display log entries that match a string you enter in
this field. A string can be a word, a number or a combination of words and
numbers. Type the string you want to search the logs for.
Source Address You can filter the logs to only display log entries that are created as a result of
some action originating at a particular IP address. For example, an administrator
logging into the X6004 from a computer with a particular IP address on your
network. Type the IP address you want to search for as the source IP address of
the X6004.
Destination
Address
You can filter the logs to only display log entries that are created as a result of
some action terminating at a particular IP address. This is typically the X6004s
LAN or WAN IP address. Type the IP address you want to search for as the
destination IP address of the X6004.
Search
Click Search to show the filtered results of your logs. Only the logs that match the
criteria you specified are displayed.