Filter
Top Products
Chapter 5 The Web Configurator
X6004 User’s Guide
83
5.7 Resetting the X6004
If you forget the administrator password, you will need to reset the X6004 back to the factory
defaults.
Use the RESET button on the front panel of the X6004 to reset the X6004 back to factory
defaults. Press and hold the RESET button for 10 seconds. The X6004 will reload its factory
defaults.
The X6004 is reinitialized with a default configuration file including the default administrator
username (admin) and password (1234). The LAN IP address of the X6004 also reverts to the
default 192.168.1.12 and the WAN IP address reverts to 172.16.1.1.
5.8 Rebooting the X6004
If the X6004 is not performing as expected, you can reboot the system as a basic
troubleshooting step. Rebooting the X6004 does not change any of the configuration settings.
Rebooting simply restarts all of the subsystems (voice processing, network interfaces and so
on) and reloads the latest saved configuration on the X6004.
Click Maintenance > Reboot to open the Reboot screen. Click the Reboot button to restart
the X6004.
Figure 72 Maintenance > Reboot
5.9 Logging Out of the Web Configurator
Click the Logout button ( ) in the navigation panel to exit the web configurator. You have
to log in with your password again after you log out. This is recommended after you finish a
management session for security reasons.
Left Use this icon to move selected items from right to left in a
screen.
Right Use this icon to move selected items from left to right in a
screen.
Table 11 Icon Explanation Table (continued)
ICON NAME DESCRIPTION
or
or