Filter
Top Products
Chapter 34 Product Specifications
X6004 User’s Guide
284
Table 134 Firmware Specifications
FEATURE DESCRIPTION
Default IP Address / Subnet
Mask
LAN: 192.168.1.12 / 255.255.255.0
WAN: 172.16.1.1 / 255.255.255.0
Default Subnet Mask 255.255.255.0 (24 bits)
Administrator User Name admin
Default Password 1234
Device Management Use the web configurator or commands to easily configure the rich range
of features on the X6004.
SIP Server The X6004 performs SIP proxy, registrar and redirect server functions.
Auto Provisioning The X6004 can send auto configuration files to ZyXEL IP phones.
QoS The X6004 can mark outgoing VoIP frames with DiffServ code point
values, ToS priority values or user specified values for the ToS field in
the IP header.
Voicemail The X6004 can store voicemail messages on the flash memory, hard
drive (if installed) or it can forward voicemail messages to individual end
user email accounts.
Maximum voicemail length per message: 90 seconds
Maximum total voicemail length per user: 300 seconds
Static Route Static routes tell the X6004 how to forward VoIP traffic to remote
networks.
Extension Management Manage extensions by placing them in authority groups. You can then
assign calling privileges to the authority groups. The X6004 supports SIP
client devices as well as traditional analog phones if an FXS interface
card has been installed.
Auto-attendant The X6004 supports up to 3 sets of auto-attendant profiles to handle
incoming calls. Auto-attendant helps guide incoming calls to their
destination.
Audio Format for Auto-Attendant: G.711 format audio file (*.wav), µ-law
8-bit mono mode.
Maximum size of a single message: 600 kb. Maximum size of all
messages 10 Mb.
Outbound Line Groups The X6004 supports outbound lines via SIP connections to an ITSP,
trusted peer connections. PSTN connections are also supported, if an
FXO interface card is installed.
LCR Least Cost Routing allows administrators to set up dialing rules and
configure priorities for outbound lines used when users make phone
calls.
Hunt Group Configure a group of user extensions which can be reached by dialing a
single phone number. This can be used for a call center application.
Page Group Configure sets of extensions that can all be called at the same time by
dialing a single number (page group number). When a page group
number is dialed, all of the extensions automatically pick up via
speakerphone.
Emergency Call Configure emergency telephone numbers which are given the highest
priority for outbound lines on the X6004.
Conference Calling Configure conference rooms which can be accessed by callers from
within your organization as well as from outside your organization.