Filter
Top Products
Chapter 14 Authority Group
X6004 User’s Guide
133
14.3.2 Add a SIP Extension
Use this screen to add a SIP extension to an authority group on the X6004. To access this
screen, click the Add icon in the Authority Group configuration screen.
Figure 108 Add a SIP Extension
Each field is described in the following table.
Apply Click Apply to save your changes.
Cancel Click Cancel to go back to Authority Group configuration page without saving
your changes.
Table 40 Add Multiple SIP Extensions
LABEL DESCRIPTION
Table 41 Add a SIP Extension
LABEL DESCRIPTION
Basic Setting
Group Select the authority group you want this extension to belong to.
Extension
Number
Type the extension number for this IP phone extension. The extension number
can be from 1 to 20 digits in length.
Web/IVR/VM PIN
Code
Type the PIN code that this allows the person with this extension to access the
web portal, Interactive Voice Response system or Voice Mail. This value can be
up to eight alphanumeric characters and spaces are not allowed.
SIP Auth. User
Name
Type the SIP user name associated with this extension. The IP phone registering
with the X6004 must provide this for authentication. The user name can be up to
32 alphanumeric characters long. Spaces are not allowed.
SIP Auth.
Password
Select Customization and type the SIP password associated with this extension.
The IP phone registering with the X6004 must provide this for authentication. The
password can be up to 32 alphanumeric characters long. Spaces are not allowed.
If you are using auto provisioning (see Chapter 8 on page 103), you can select
Random and type the length of the password (4 - 32). The X6004 will assign a
random SIP password to this extension. The password will be automatically sent
to the IP phone client.
Description
Type a brief description for this SIP extension. This field can be left blank.