Filter
Top Products
Chapter 15 Ring Group
X6004 User’s Guide
149
15.2.5 Add/Edit Hunt Group Screen
The screens for editing or adding hunt groups on the X6004 contain the same fields. Only the
screen used to add hunt groups is shown below. Click the Add (or Edit) icon in the Hunt
section of the Ring Group configuration screen to view the screen as shown.
Figure 126 Add/Edit Hunt Group
Each field is described in the following table.
Max Paging Time Type the maximum number of seconds that a person can page a group of
extensions.
Description
Type a description for this page group.
Extensions Move the extensions you want to be in this page group to the Selected Member
column by highlighting them in the Peer Pool column and clicking the Right icon.
Remove the extensions you don’t want to be in this page group from the Selected
Member column by highlighting them and clicking the Left icon.
Apply
Click Apply to save your changes and to apply them to the X6004.
Cancel Click Cancel to go back to the Ring Group configuration page without saving your
changes.
Table 55 Add/Edit Page Group
LABEL DESCRIPTION
Table 56 Add/Edit Hunt Group
LABEL DESCRIPTION
Entry Number Type the number you have to dial to call the extensions in this hunt group. This
number can be from 1 to 16 digits long.
Description
Type a description for this hunt group.