ZyXEL Communications X6004 Telephone User Manual


 
Chapter 3 Tutorials
X6004 User’s Guide
50
Procedure:
1 In the web configurator, click Configuration > PBX > Outbound Line Management >
Outbound Line Group to open the following screen.
Figure 25 Configuration > PBX > Outbound Line Management > Outbound Line Group
2 Click the Add icon in the FXO Trunk section to open the following screen. Enter the
name of the group (PSTN1 in this example) and click Apply. Note the Machine ID field
(this is a name automatically assigned to the X6004). In some web configurator screens,
the outbound line group is identified in the following format Machine ID:Group Name,
so in our example it is IPPBX_01:PSTN1.
Figure 26 Add FXO Trunk
3 The new outbound line group displays in the following screen. Now you will add the
FXO connections to the outbound line group. Click the outbound line group’s Advanced
icon.
Figure 27 Configuration > PBX > Outbound Line Management > Outbound Line Group