Filter
Top Products
Chapter 3 Tutorials
X6004 User’s Guide
47
Figure 19 Auto Provisioning
After you configure the SIP extensions (see Section 3.1.1 on page 42) and make your network
connections (see Figure 17 on page 45), use the following directions to map each SIP
extension to the appropriate SIP device. You need the MAC address of each SIP device (or the
serial number if it is a softphone).
1 Click Configuration > PBX > Server Configuration > Auto Provision. Then click a
SIP extension’s Edit icon.
Figure 20 Configuration > PBX > Server Configuration > Auto Provision
2 Enter the SIP device’s MAC address (or serial number if it is a ZyXEL softphone). This
example is for a softphone with a serial number of 1234567890. Click Set Profile.