Filter
Top Products
Chapter 22 Call Services
X6004 User’s Guide
205
22.7.1 Call Parking Configuration
Use this screen to configure call parking on the X6004. Click Configuration > PBX > Call
Settings > Call Park to view the Call Parking screen.
Figure 186 Call Parking Configuration
The following table describes the labels in this screen.
6. Caller B walks to another
extension and reconnects to
the call with A by dialing #
followed by the parking slot
number.
Conversation between caller A and B continues
Table 90 Call Parking Progression
CALLER A X6004 CALLER B
Table 91 Call Parking Configuration
LABEL DESCRIPTION
Call Parking
Setting
Representative
Number
Enter the telephone number users should dial to park a telephone call.
Amount of
Parking
Position /
ZyStack
Enter the number of call parking extensions available. This also establishes the
range of numbers that users will have to dial to retrieve a parked call.
Parking Time Enter the maximum number of seconds that a call can be parked. After a parked call
exceeds this amount of time, it is routed back to the original extension that parked
the call.
Apply Click this to save your changes and to apply them to the X6004.
Reset Click this to set every field in this screen to its last-saved value.