Filter
Top Products
Chapter 8 Auto Provision
X6004 User’s Guide
105
Each field is described in the following table.
8.2.1 Auto Provision Edit Settings
Use this screen to set up the auto provisioning settings for an extension on the X6004 and
associate it with a ZyXEL device on your network. To access this screen, click Configuration
> PBX > Server Configuration > Auto Provision > Edit.
Figure 90 Configuration > PBX > Server Configuration > Auto Provision > Edit
Each field is described in the following table.
Table 24 Configuration > PBX > Server Configuration > Auto Provision
LABEL DESCRIPTION
Configuration
Phone Numbers This field displays the extension number configured on the X6004.
MAC Address This field displays the MAC address of the ZyXEL device specified to receive
configuration settings from the X6004.
This field is blank for extensions assigned to software based IP phones.
Serial No.
This field displays the serial number of the software based IP phone specified to
receive configuration settings from the X6004.
This field is blank for extensions assigned to hardware based IP phones.
SPTGEN File
Exist
This field displays Yes, if a configuration file (SPTGEN file) has been created. It
displays No, if an SPTGEN file has not been created.
Edit
Click the Edit icon to create a configuration file and associate it with a ZyXEL
device on your network. The Auto Provision Settings screen opens.
View SPTGEN
Click the Advanced icon to view the settings in the configuration file.
Table 25 Configuration > PBX > Server Configuration > Auto Provision > Edit
LABEL DESCRIPTION
Provisioning
Setting
These settings apply to the phone number (extension) you specified in the Auto
Provision screen.
MAC Address
Specify the MAC address of the ZyXEL device that receives configuration settings
from the X6004 for this extension.
This field is left blank for extensions assigned to software based IP phones.
Serial No. Specify the serial number of the software based IP phone that receives
configuration settings from the X6004 for this extension.
This field is left blank for extensions assigned to hardware based IP phones.