Filter
Top Products
Standard Telephones
3-11
for instructions on using pool access codes). Otherwise, the system selects
an idle line from a pool automatically when the user dials a 9 at intercom
dial tone.
■ Unless Call Waiting (#316) is assigned to specific standard phone
extensions, there is no indication of a second call and an inside caller will
hear a busy tone if a standard phone is in use. If Call Waiting is assigned,
the user hears a call-waiting tone (two beeps) when a second call comes in
for the extension. (The call-waiting tone is not repeated.) The user can use
the switchhook to put the first call on hold and speak to the party on the
second call and to switch back and forth between the two parties.
■ Users can make a voice-signaled call
from
a standard phone, but if users
try to make a voice-signaled call
to
standard phone, it will ring because the
standard phone does not have a system speaker.
■ Users cannot use the System Password.
■ Users cannot access the following system features: Background Music,
Caller ID Name Display, Caller ID Inspect, Do Not Disturb, Exclusive
Hold, Manual Signaling, Privacy, Save Number Redial, VMS Cover,
Voice Interrupt on Busy, Voice Interrupt on Busy Talk-Back, or Voice
Mailbox Transfer.
Users can, however, use Automatic Extension Privacy (#304) and
Automatic VMS Cover (#310), which are similar to the Privacy and VMS
Cover features.
■ A display on a standard phone will not show Caller ID information, system
messages.
NOTE:
Standard phones can be used to make calls when plugged into any port of
the PARTNER Endeavor 362 processor or 362EC expansion module.
However, standard phones will ring only when plugged into the Tip Ring
ports, which are the bottom two ports.
■ A speaker on a standard phone is not a system integrated speaker;
therefore, it cannot receive “voice” type calls, such as a group page.