Filter
Top Products
Feature Reference
5-34
Programming
(See Figure 2-2 on page 2-19 for the location of special programming buttons
such as
s and e on system phones.)
To change the Automatic VMS Cover setting for an extension:
1. Press
f0 0 s s # 3 1 0 at extension
10 or 11.
2. Enter the number of the extension to be covered by the voice messaging
system.
3. To assign or unassign Automatic VMS Cover, press
D until the
appropriate value displays.
4. To program another extension, press
n or p until the
extension number shows on the display. Then repeat Step 3.
5. Select another procedure or exit programming mode.